Foggers >> Easyfog
Easyfog is a ULV fogger used for fogging both water & oil based
solutions. Typical application includes ‘aerial disinfection’ of
enclosed areas like hospital O.T.’s. I.C.U.’s, pharma rooms
etc. The fogger breaks the supplied liquid into very fine particle
sizes that remain suspended in the air for a longer period of time & thus
the contact period with micro-organisms in the air is longer resulting
in better germ control. Easyfog comes pre-fitted with a Timer
to ensure flexibility of use & enhance life of the fogger.
When used with our accessory ROTOSTAND
the overall process is more ‘uniform’ and the area coverage
also increases. It is already ahead of its competitors as it incorporates
additional features based on practical usage. The construction is robust,
design portable and mechanism simple; to allow it to be used for hand-held
||Single body ULV Fogger
for Industrial/Commercial use.
||Aluminium & Alloys.
||Intermittent (Comes attached with a
Timer Device for flexibility of use).
||Forced air through a nozzle system.
High-shear, counter-rotating vortex
||Fogging liquids (especially for aerial
Hospital O.T.’s & I.C.U.’s.
Pest / Germ Control.
Disinfection of microbial germs.
Storage Houses etc...
- Highest no. of features & highest area coverage compared
to any other conventional fogger in its category.
- Aluminium made body parts ensure portability & resist
- Since the supplied liquid is broken into very fine particles
on the nozzle assembly itself and the aluminium body does not come
in contact with the chemical, internal corrosion and chemical attack
- The unit comes pre-fitted with a ‘Liquid Flow Control Valve’ for
ease of use. Fog output is controlled with this valve. Higher the
volume of output, larger will be the fog particles and vice versa.
- The unit has a vertical adjustable head and can be rotated (using
our accessory: ROTOSTAND)
to gain better direction, maximum results and greater efficiency.
- Its compact design and low weight utilizes very little space
and the unit can be installed without making any structural changes
||5 ~ 10 microns.
100 ~ 1,000 sq.fts (10,000 cubic.fts)
|Liquid Flow Rate:
||0 ~ 300 ml/min. (1 ~ 18 LPH.) – Depends
on viscosity of liquid. Attached Flow Control Valve with
||1 HP, 220 ~ 240 Volts AC, 50/60 Hz.
||20,000 RPM (approx.)
4 Liters (1 Gallon)
|Standard Packing Material:
||Corrugated Box with enclosed thermo-cole;
cut to design.
||[15 x 15 x 18 inchs.] x 1